Mitsubishi MELSEC-Q Series User Manual page 186

5 CONNECTING WEB SERVER MODULE TO NETWORK
Item
Network type setting
IP address setting
DNS server setting
Automatic network connection setting at start-up
Item
Send e-mail account setting
E-mail address (To:) setting
Item
Notification IP address
Item
IP address notification
Item
Account setting No. 1
5 - 5
(1) Network setting of Web server module
(a) Make setting to connect the Web server module to the network.
(b) From the Administrative menu, set as follows
(For other than the following settings, the default values will be used.):
[Administrative menu]
(Refer to 2))
(Refer to 4))
1) System setting (Refer to Section 4.6.3)
2) E-mail setting (Refer to Section 6.6.3)
3) Address notification setting (Refer to Section 6.9.2)
[IP address setting]
[E-mail notification setting]
4) Account setting (Refer to Section 4.6.5)
"System setting" (Refer to 1))
"Address notification setting" (Refer to 3))
Select "Connecting through LAN or the router.".
Select "Obtain an IP address automatically.".
Select "Obtain a DNS server address automatically.".
Select "Automatic connection to network at start-up.".
Enter the e-mail setting of the Web server module.
• SMTP server name
• E-mail address (From:)
• User name
• Password
• Confirm password
Enter an e-mail address (To:) of the personal computer.
• No. 1
• Select "Notify the IP address set in the "System setting" screen.".
• Select "Notify the HTTP port number set in the "System setting"
screen.".
• Select "Notify an IP address at network connection".
• Select "E-mail address (TO:) No. 1" as the destination of IP
address notification.
Enter the following setting for the accounting setting No. 1.
(Delete the default account.)
• User name
• Password
• Confirm password
MELSEC-Q
"E-mail setting"
"Account setting"
Set value
Set value
: (example) mailserver@****.****.ne.jp
: (example) mailaddress@****.****.ne.jp
: (example) mitsubishi@****.****.ne.jp
: (example) MITSUBISHI
: (example) MITSUBISHI
: (example) pcmailaddress@****.****.ne.jp
Set value
Set value
Set value
: administrator001
: (example) QJ71WS96ADMIN
: (example) QJ71WS96ADMIN
5 - 5