4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 15
(c)
The standard screen appears on the Web browser.
(Example) In the case of Microsoft
POINT
If access to the Web server module fails, first issue the PING command from the
personal computer to the Web server module to check the existence of the Web
server module.
Refer to Section 6.11.3 for how to issue the PING command.
(5) Accessing the host CPU of the Web server module
(a)
Display the "Device monitor" screen Within the Monitor screen.
[Monitor screen]
(b)
Access the host CPU of the Web server module and confirm that the
following input signals (X) are on.
Module READY (X0)
Network connection status (X4)
(c)
Since the monitor screens use the Java applet, Java VM is required for the
Web browser to execute the applet.
Refer to Section 3.1 REMARKS (2) (3) for how to download Java VM.
Corporation's Internet Explorer 5.5
R
"Device monitor"
MELSEC-Q
4 - 15