Mitsubishi MELSEC-Q Series User Manual page 217

6 FUNCTIONS
(a) (b)
6 - 15
(e) Operation status
The operation status of the programmable controller CPU in which the
event occurred/was restored is displayed.
Item
Normal STOP
Normal RUN
PAUSE
Warning STOP ( 1)
Warning RUN
System error
1 In the QCPU (Q mode) function version A, QCPU (A mode), QnACPU and ACPU,
a warning STOP does not occur when the programmable controller CPU is
stopped with a continue error. (A system error occurs.)
(f) E-mail sending
The e-mail transmission status due to event occurrence is displayed.
Item
None
Sending
Complete
ERR****h
( indicates the error code)
(3) Tag event
The tag event history is monitored.
The contents of /ROM/WWW/EVENT/TAGWATCH.CSV are displayed.
(c) (d)
(a) Date
The date and time when the event occurred/was restored is displayed.
(Example) 2002/08/05 08:58:17
The programmable controller CPU is stopped with no error.
The programmable controller CPU is running with no error.
The programmable controller CPU is pausing.
The programmable controller CPU is stopped with a continue error.
The programmable controller CPU is running with a continue error.
The programmable controller CPU is in a stop error status or cannot
communicate with the target programmable controller CPU (e.g.
network error).
E-mail transmission has not set for the event that occurred.
E-mail is being sent according to the setting for the event that
occurred.
E-mail was sent according to the setting for the event that occurred.
Since an error occurred, e-mail transmission failed.
(e)
MELSEC-Q
Description
Description
(f)
(h)
(g)
(i)
6 - 15