Intelligent Function Module Switch Setting - Mitsubishi MELSEC-Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.7 Intelligent Function Module Switch Setting

Switch 1
Switch 2
Switch 3 (lower byte)
Switch 4 to 5
4 - 45
[Setting Purpose]
Set the mode, default operation, battery error detection, logging monitor and
response monitoring time for Web server module on the "Intelligent function
module switch setting" screen.
[Start Procedure]
[GX Developer]
assignment> tab
function module"
Refer to the GX Developer Operating Manual for the screen display method.
[Setting screen]
[Setting item]
Item
(1) Mode setting (Switch 1)
Select the operation mode for Web server module.
Setting Number
0000 Online
H
0001 Hardware test
H
0002 CH1 Self-loopback test
H
0003 CH2 Self-loopback test
H
9999
Module initialization mode
(270F )
H
<Project> Window
Switch setting "Switch setting for I/O and intelligent
Mode setting
Default operation setting/Battery error detection setting/Logging
monitor setting
Response monitoring time setting
For system use (Do not set)
Item
Normal operation mode
Tests the ROM/RAM/switch settings
(Refer to Section 4.8.3)
Tests the self diagnostics for CH1.
(Refer to Section 4.8.1)
Tests the self diagnostics for CH2.
(Refer to Section 4.8.2)
Initializes the module to default setting.
(Refer to Section 4.13)
[Parameter] [PLC parameter]
Description
Description
MELSEC-Q
<I/O
4 - 45