Mitsubishi MELSEC-Q Series User Manual page 205

6 FUNCTIONS
6 - 3
(a) CPU name
1) Set the access target CPU.
2) Select the CPU name set in the access target CPU setting.
(Refer to Section 4.6.7 for the access target CPU setting.)
3) The CPU name drop-down list displays the setting No. and CPU
names of the access target CPU setting.
(Example) 01: Control CPU
4) By default, the host CPU of the Web server module is set as the
access target CPU setting No. 1.
(b) Device
1) Specify the device type and actual device number of the device.
2) Specify Device specification by qualification (indexing, digit
specification, bit specification for word device) is not available.
3) Refer to Appendix 2 for the accessible devices
(c) Data type
Select the data type of the word device.
16 bit integer
32 bit integer
Real number
ASCII character : Displayed in ASCII characters.
(d) Display form
Select the display form when the data type is a 16 bit integer or 32 bit
integer.
DEC: Displayed in decimal.
HEX: Displayed in hexadecimal.
(e) Monitor form
The monitor form is indicated below.
(Example) When the data registers (D0 and later) are displayed as 16 bit
integers in decimal
1)
1) The devices are displayed.
2) The bit ON/OFF statuses are displayed. (1: ON, 0: OFF)
3) The values stored in the word devices are displayed.
(DEC/HEX display)
: Displayed as a 16 bit integer.
: Displayed as a 32 bit (double word) integer.
: Displayed in real number.
2)
MELSEC-Q
3)
6 - 3