Mitsubishi MELSEC-Q Series User Manual page 150

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 33
(1) Account setting
(a) Make account setting.
Up to 16 accounts can be set.
(b) Prior to shipment, the following default account is registered for the Web
server module as the account setting No. 1. (The default account can be
edited.)
• User name
• Password
• Access authority : Device write/Tag component write/Administrator
• Initial screen
[Setting screen]
[Setting item]
Item
Item Selects the account setting No. to be edited or deleted.
User name The user name is displayed.
The validity of the device write/tag component write/administrator authority of
Access authority
the account is displayed.
The initial screen address for access to the Web server module is displayed.
Initial screen ( )
For "Not specified", the top page of the standard screen is displayed.
Edit
Edits the selected account.
Delete
Deletes the selected account.
Important
(1) After completion of initial setting, make sure to register at least one account with
administrator authority, and then connect to the network.
(2) Make sure to delete the default account to prevent illegal access.
(3) The remote password function of the QCPU is not used for the web server
module.
POINT
When access to the Web server module cannot be made, e.g. the registered
account has been forgotten, make the default setting by the switch setting of GX
Developer and make the account setting again.
Refer to Section 4.7 for the switch setting of GX Developer.
: QJ71WS96
: MITSUBISHI
: Standard screen top page (Top page (/index.htm))
Description
MELSEC-Q
4 - 33