Mitsubishi MELSEC-Q Series User Manual page 248

6 FUNCTIONS
6 - 46
(g) File capacity
As the file capacity, select any of the following.
1) Specification for number of lines (1 to 10000 lines)/for high-speed
logging (100 to 10000 lines)
2) Size specification (1 to 512k bytes)/for high-speed logging (10 to 512k
bytes)
3) Time specification
Hour: 0 to 23, "Per"
Minute: 0 to 59, "Per" (Per minute can be specified only when Per hour
is specified)
Second: 0 to 59
(h) Saved files names
As the data to be added to the saved file name, select any of the following.
(Multiple selection allowed)
The data are added to the saved file name in order of 1) to 3).
1) Name (File name set at
2) Date (Year, month, day)
3) Time (Hour, minute, second)
LOGNAME_20030712_201230_00000001.CSV
(i) Number of saved files
Set the number of saved files. (1 to 1000)
POINT
When browsing the logging file by logging monitor or FTP, reduce the number of
saved files.
If the number of saved files is large, it will take several minutes to obtain a file list by
logging monitor or FTP.
(For logging monitor, the number of saved files must be reduced only when the last
update time of the file is displayed in the file specifying field. (Refer to Section 4.7
(2).)
(j) When the number of saved files exceeds the above set value
As the operation to be performed when the number of saved files exceeds
the set value, select either of the following.
1) Overwrite
2) Stop
(k) E-mail delivery: Send a saved file to the following e-mail address.
Set whether the saved file will be sent by e-mail or not.
1) Not checked
E-mail is not sent.
" "
File name )
Serial number (8-digit hexadecimal)
(Serial number is always added)
Time : Second
Time : Minute
Time : Hour
Date : Day
Date : Month
Date : Year
Name: File name set at "File name"
MELSEC-Q
6 - 46