Mitsubishi MELSEC-Q Series User Manual page 49

2 SYSTEM CONFIGURATION
Item
Protocol
Authentic method
IP address
E-mail (When being set)
2 - 9
(6) RS-232 cable
Use the RS-232-compliant cable of up to 15m.
[Recommended cable]
Oki Electric Cable Co., Ltd.
7/0.127 P HRV-SV ...
7/0.127 13P HRV-SV.)
(7) Internet service provider
The following table provides the specifications of the Internet service provider to
be connected to the Web server module.
PPP (Point to Point Protocol)
PAP or CHAP (Operable without authentication)
Global IP address must be assigned. ( 3)
SMTP server must be prepared. ( 4)
3 When using a UPnP-incompatible router type ADSL modem or broadband router, it is
necessary for the user to make a contract on a static IP address with an Internet
service provider and make the NAT setting of the router.
4 It must be able to access with "No authentication" or "POP before SMTP"
authentication.
Also, it must be able to access with the SMTP server and Port No.25.
: Specify the number of pairs. (For 13 pairs, specify
Specifications
MELSEC-Q
2 - 9