Mitsubishi MELSEC-Q Series User Manual page 475

APPENDIX
App - 6
Device
(Device name)
Link input (Jn\X)
Link output (Jn\Y)
Link relay (Jn\B)
Link direct device
Link special relay (Jn\SB)
Link register (Jn\W)
Link special register
(Jn\SW)
Intelligent function
Buffer register (Un\G0)
module device
1 The local devices and the file registers for individual programs of the Q/QnA series
programmable controller CPU are not accessible by specifying the program name.
Do not use the local device and file registers for individual programs since correct
read/write may not be available.
2 Specify SM for the QCPU (Q mode)/QnACPU, or specify M9000 or later for the QCPU
(A mode)/ACPU.
3 Specify SD for the QCPU (Q mode)/QnACPU, or specify D9000 or later for the QCPU
(A mode)/ACPU.
4 The device name can be specified by using either symbol.
5 Specify the block number for "n".
6 Specify the network No. for "n".
7 Specify the I/O number of the intelligent function module/special function module for
"n".
8 Not accessible when the Q00JCPU is used.
9 The M, L and S devices are in the same area independently of the device setting in
the parameters.
10 ER0\R cannot be specified.
11 M32768 or later cannot be specified.
12 B8000 or later cannot be specified
1 QCPU
(Q mode)
6
6
6
6
6
6
7
MELSEC-Q
(From the previous page)
QCPU
QnACPU ACPU
(A mode)
: Accessible, : Inaccessible
App - 6