Mitsubishi MELSEC-Q Series User Manual page 120

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 3
(2) Accessing the other station CPU from the Web server module
Web server module
MELSECNET/H, etc.
Procedures before operation
Confirm that the Web server module can access the
host station CPU.
Confirm that the access target network system
operates correctly.
Make one-to-one connection between the Web server
module and personal computer with a crossing cable
to make the network setting.
Set the connection path to the access target CPU on
"Access target CPU setting" from the Administrative menu.
Ensure the setting on the Web server module and then
execute "Access target CPU test" from the
Administrative menu to check the connection status.
Set various functions from the Administrative menu.
Tag setting
Logging setting
Event setting
Click on "Update" button on the "Setting update"
screen, or power the programmable controller OFF
and ON or reset the CPU module, to update the
settings on the Web server module.
Monitor each operation on the monitor screen to
confirm the setting.
Operation
personal computer
crossing cable
MELSEC-Q
Refer to Section 4. 2. (1).
Refer to the user's manual of the
network module
Refer to Section 4. 5.
Refer to Section 4. 6. 7.
Refer to Section 6. 11. 2.
Refer to Chapter 6.
Refer to Section 4. 6. 2.
Refer to Section 6.2.
4 - 3