Appendix 5.2 Precautions For Replacing The Old Version With The New Version - Mitsubishi MELSEC-Q Series User Manual

APPENDIX

Appendix 5.2 Precautions for replacing the old version with the new version

App - 16
This section provides the precautions for replacing the module whose first 5 digits of
serial No. are 05111 or earlier with the one whose first 5 digits of serial No. are 05112
or later.
(1) Restoration of setting information file
The setting information file of the module with first 5 digits of serial No. 05111 or
earlier can be restored to the module with first 5 digits of serial No. 05112 or later.
However, the setting information file of the module with first 5 digits of serial No.
05112 or later can not be restored to the module with first 5 digits of serial No.
05111 or earlier. (An error will occur if such restoration is executed.)
(2) User part parameters that must be set
On the module with first 5 digits of serial No. 05112 or later, the following
parameters of the user parts have been changed to the items that must be set.
When using the following user parts, be sure to set the following parameters. An
error will occur unless any of them is set.
Part name
Data block parts
Level display parts
Graphic display parts
Comment display parts
Historical graph display
parts
Historical data display
parts
Parameter that must be set
TAGNO, ELMNO1 to ELMNO64
( 2)
TAGNO, ELMNO
TAGNO, ELMNO
RANGENO ( 3)
LOW1 to LOW5
HIGH1 to HIGH5
PICTURE1 to PICTURE5
TAGNO, ELMNO
RANGENO ( 4)
LOW1 to LOW5
HIGH1 to HIGH5
CMT1 to CMT5
LOGNO
GRAPHNO ( 5)
ELMNO1 to ELMNO5
LOGNO
XNO ( 6)
ELMNO1 to ELMNO10
MELSEC-Q
Initial value of module with
first 5 digits of serial No.
05111 or earlier ( 1)
1
1
1
1
0
1
File not set (not displayed)
1
1
0
1
File not set (not displayed)
1
1
1
1
1
1
App - 16