Site Of Operation; Infinity R50N - Dräger Infinity M300 Series Instructions For Use Manual

Technical specifications

Site of operation

NOTE
The specifications displayed within this chapter are subject to change without notice.
The site of operation of all equipment must meet environmental requirements as specified in this section.
For related information, refer to "General safety information" on page 13.
The Infinity CentralStation and Infinity M300 are not intended for home care use or the following hospital
environments:
– Hyperbaric chambers,
– CT areas,
– Environments containing MRI equipment.
WARNING
Any changes or modifications to the device hardware or software have exclusively to be done by
service technicians authorized by Dräger. Any unauthorized change can decrease patient safety,
could void the user's authority to operate the equipment, and will void the warranty.

Infinity R50N

Physical attributes
Size (H x W x D)
Weight
Connections
Power requirements
Input voltage
Risk management
Protection class
Protection against liquid ingress
Mode of operation
Environmental requirements
Operation
270
180 x 120 x 222 mm
(7.1 x 4.7 x 8.7 in)
1.6 kg (3.6 lb)
AC power
X14 Infinity network connector
Potential equalization connector (grounding lug)
100 to 240 VAC (50/60 Hz, 1 A)
Class 1
IPX0 per IEC 60529
Continuous
Instructions for use – Infinity ® M300 and M300+ series – VG3.0