Service Error Code; Error Code List; Jam Codes; Jam Code List - Canon DADF-AA1 Service Manual

6.1 Service Error Code

6.1.1 Error Code List

Code
E413

6.2 Jam Codes

6.2.1 Jam Code List

Code
0003
0004
0005
0006
0007
0008
0044
0045
0046
0047
0048
0071
0073
0090
0091
0092
0093
0094
Detail Error state Description
code
Release motor error (The level of the roller motor HP sensor has not changed within the specified time
even after the Shift motor was driven.)
Cause: The release motor HP sensor, release motor, or ADF driver PCB is defective or the release cam
load has increased.
0001 The release roller has The release motor HP sensor had not turned on within the specified
been opened during time since start of driving of the release motor, and the operation
release t motor was retried but turning on of the release motor HP sensor has not
initialization. been detected.
0002 The release roller has The release motor HP sensor had not turned on within the specified
been closed during time since start of driving of the release motor, and the operation
release motor was retried but turning on of the release motor HP sensor has not
initialization. been detected.
Name Sensor No.
Registration sensor delay SR1
Registration sensor stationary SR1
Read sensor delay SR1,SR2
Read sensor stationary SR2
Delivery reversal sensor delay SR2,SR3
Delivery sensor stationary SR3
Fist document registration sensor SR1
stationary
First document read sensor non- SR1,SR2
arrival
First read sensor stationary SR2
First document delivery reversal SR2,SR3
sensor non-arrival
First document delivery reversal SR2
sensor stationary
Timing error -
Release NG SR11
ADF open Sensor in reader
unit
User ADF open Sensor in reader
unit
ADF cover open SR6
User cover open SR6
Initial stationary SR1,SR2,SR3
Description
1) The registration sensor has not detected
paper within 1.5 seconds since start of
separation.
2) The registration sensor has not detected
paper when the paper has been fed by the
predetermined distance for reversal.
The trailing edge of paper has not been detected
when the paper has been fed by the
predetermined distance since it was detected by
the registration sensor.
The read sensor has not detected paper when the
paper has been fed by the predetermined
distance since reception of a pickup request.
The trailing edge of paper has not been detected
when the paper has been fed by the
predetermined distance since detection of it by
the read sensor.
The delivery reversal sensor has not detected
paper when the paper has been fed by the
predetermined distance since reception of a read
request.
The trailing edge of paper has not been detected
when the paper has been fed by the
predetermined distance since the delivery
reversal sensor detected the paper.
A read sensor delay jam has occurred during
feed of the first document.
A read sensor delay jam has occurred during
feed of the first document.
A read sensor stationary jam has occurred
during feed of the first document.
A delivery reversal sensor delay jam has
occurred during feed of the first document.
A delivery reversal sensor stationary jam has
occurred during feed of the first document.
The software sequence has not ended normally
within the specified time.
The Release motor HP sensor has not turned on
within the specified time (1 second).
The ADF has been opened during operation (of
the drive system).
The ADF has been opened during operation (of
the drive system).
The ADF cover has been opened during
operation (of the drive system).
The user cover has been opened during
operation (of the drive system).
Paper has been detected in the path during feed
of the first document.
Chapter 6
0024-7072
0024-7073
6-1