Table of Contents
Advertisement
6 Status Indicators
The electronic module incorporates LED's for displaying the status of the
fieldbus connection, the status of the inputs and outputs, and interference in
the output circuit.
1
2
Fig. 6-1: Status Indicators
1
2
3
6.1 Input Status Indicators
The LED's are connected in series with the base module sensor connections,
and will illuminate when a threshold input voltage is present.
Input voltage
-3 V ... +5 V
+5 V ... +15 V
+15 V ... +30 V
Fieldbus Dependent I/O Module
CANopen
PUSH
CANopen
PREPARED
RUN
TXOVERF
RXOVERF
OVERLOAD
WAGO-I/O-SYSTEM 752 16DI/16DO
Fieldbus (CANopen) specific status indicators.
Interference in the output circuit is displayed as a collective fault
marked "OVERLOAD".
Status LED's for the inputs and outputs are integrated in the area of
the marking label.
PUSH
3
752-327
Input value
'0'
Not defined
'1'
Status Indicators
g1x2805x
LED
OFF
Not defined
ON
• 25
Advertisement
Table of Contents
