Status Indicators; Input Status Indicators - WAGO -I/O-SYSTEM 752 Manual

22 •

Status Indicators

6 Status Indicators
The electronic module incorporates LED's for displaying the status of the
fieldbus connection, the status of the inputs and outputs, and interference in
the output circuit.
1
2
Fig. 6-1: Status Indicators
1
2
3

6.1 Input Status Indicators

The LED's are connected in series with the base module sensor connections,
and will illuminate when a threshold input voltage is present.
Input voltage
-3 V ... +5 V
+5 V...+15 V
+15 V...+30 V
PUSH
PROFIBUS
RUN
BF
OVERLOAD
x1
x10 WAGO-I/O-SYSTEM 752 16DI/16DO
Fieldbus (PROFIBUS) specific status indicators.
Interference in the output circuit is displayed as a collective fault
marked "OVERLOAD".
Status LED's for the inputs and outputs are integrated in the area of
the marking label.
PUSH
3
752-323
Input value
'0'
Not defined
'1'
LED
OFF
Not defined
ON
Fieldbus Dependent I/O Module
PROFIBUS DP
g1x2305x