Status Indicators; Input Status Indicators - WAGO 752 Owner's Manual

6 Status Indicators

The electronic module incorporates LED's for displaying the status of the
fieldbus connection, the status of the inputs and outputs, and interference in
the output circuit.
1
2
Fig. 6-1: Status Indicators
1
2
3

6.1 Input Status Indicators

The LED's are connected in series with the base module sensor connections,
and will illuminate when a threshold input voltage is present.
Input voltage
-3 V ... +5 V
+5 V...+15 V
+15 V...+30 V
Fieldbus Dependent I/O Module
INTERBUS
PUSH
INTERBUS
READY
BA
RC
RD
OVERLOAD
WAGO-I/O-SYSTEM 752 16DI/16DO
Fieldbus (INTERBUS) specific status indicators.
Interference in the output circuit is displayed as a collective fault
marked "OVERLOAD".
Status LED's for the inputs and outputs are integrated under the
marking label.
PUSH
3
752-324
Input value
'0'
Not defined
'1'
Status Indicators
g1x2405x
LED
OFF
Not defined
ON
• 21