Important Explanations; Legal Basis; Copyright; Personnel Qualification - WAGO CANopen 752 Manual

1 Important Explanations

To allow the user fast installation and commissioning of the units described in
this manual it is necessary to attentively read and observe the following notes
and explanations.

1.1 Legal Basis

1.1.1 Copyright

This manual including all of its illustrations is copyrighted; deviations from
the copyright stipulations are strictly prohibited. Reproduction, translation into
foreign languages as well as electronic and photographic archiving or changes
require the written approval of WAGO Kontakttechnik GmbH. Non obser-
vance will result in claims for damage.
WAGO Kontakttechnik GmbH reserves all rights for changes or amendments
which serve technical progress. All rights for the issuing of patents or the pro-
tection of registered designs are reserved by WAGO Kontakttechnik GmbH.
Products of other suppliers are always referred to without reference to patent
rights. For this reason the existence of such rights cannot be excluded.

1.1.2 Personnel Qualification

The use of the product described in this manual is solely intended for qualified
persons trained in PLC programming, qualified electricians or persons in-
structed by qualified electricians who are also familiar with the applicable
standards and directives. WAGO Kontakttechnik declines all liability for
faulty operation and damages to WAGO products and products from other
suppliers resulting from non-observance of the information contained in this
manual.

1.1.3 Intended Use

For the individual application, the components are supplied with a defined
hardware and software configuration. Changes are only admitted within the
framework of the possibilities documented in the manuals. All other changes
to the hardware or software and any use of the components other than that in-
tended entail the exclusion of liability on part of WAGO Kontakttechnik
GmbH.
Please contact WAGO Kontakttechnik GmbH for any wishes in terms of a
modified or a new hardware or software configuration.
Fieldbus Dependent I/O Module
CANopen
Important Explanations • 1