Table of Contents
Advertisement
VERSION 02/2018
OPERATING MANUAL
Push the trigger upward into the
air valve piston. The recess in the
trigger must engage correctly in the
indentation of the piston.
9
Cover (5)
The cover must be handled
carefully and not be twisted
or distorted in any way.
1. Press metal sleeve (6) back in cover (5) (e.g., press on table). In the process, only exert
counter pressure on the sleeve bracket and not on the entire cover.
2. Position cover straight and level, and carefully press in. Use only minimal force, gently
rocking from side to side if necessary.
3. Ensure that the cover is flush mounted on all sides.
4. Press back on metal sleeve for a flush fit (e.g., press on table).
5. Position bracket (7).
6. Mount screw, plug, and air regulation.
ORDER NUMBER DOC 2366717
8
7
B_04982
(sparingly)
Torx® 25
6
5
0.8 Nm
SW3
SW12
SW12
2
B_03502
R2
Ensure the correct
insertion position!
91
Advertisement
Table of Contents
