Setting The Current Limitation - WAGNER AquaCoat 5010 GM 5020EAW Operating Manual

VERSION 02/2018
OPERATING MANUAL

7.4.10 SETTING THE CURRENT LIMITATION

80 100
60 80
R1
40 60
20 40
R2
10 20
kV µA
R3
6 5
80 100
60 80
R1
40 60
20 40
R2
10 20
kV µA
R3
22
Above the "Current limitation" button (5) is the "Current limitation" bar graph display (22).
If the control unit is in the ready position, this light strip shows the set value as a dot.
The current limitation is an adjustable threshold. If this threshold is exceeded, for example,
by the spray gun having approached the object being sprayed, the high voltage is adjusted
downwards until the threshold is no longer exceeded.
The set values for the target high voltage (40 kV) and for spray current limitation (83 µA)
that are shown in the examples are saved in R2 by pressing and holding (for > 2 seconds)
the receipt push button.
ORDER NUMBER DOC 2366717
Procedure
1. Press the "Current limitation"
button (5) to adjust the limitation of
the spray current.
The LED (6) indicates that current
POWER POWER
limitation is selected.
0 1
AquaCoat
B_03377
27
2. The current limitation can now be
adjusted using the universal rotary
controller (2) between 10-100 µA
with a resolution of 1 µA.
The corresponding value is indicated
POWER POWER
in the LED display (27).
0 1
AquaCoat
B_03378
2
62