Table of Contents
Advertisement
VERSION 02/2018
OPERATING MANUAL
Pump side
Gun side
(*) Heat and fuse protective hose ends and bend inwards by approximately 5 cm; 2 inches.
(**) Fix the protective hose with cable ties on both sides only once at the product hose.
(***) Fix the hose set within the protective hose approx. once per meter by means of adhesive tape, starting
at distance "E".
Note: Cable ties are not permitted in areas "C" and "E", except (**).
A *
mm
200 +/- 2
inch
7.87 +/- 0.08
* Use an assembly gauge for distances A, B and F!
13.5 PRODUCT PRESSURE REGULATOR FOR DD10
Order No.
Designation
2389505
Product pressure regulator for DD10 AquaCoat
ORDER NUMBER DOC 2366717
B *
C
171 +/- 2
300 +/-10
6.73 +/- 0.08
11.8 +/- 0.4
Hose colors
Gray
Product hose
Blue
Air hose
D
E
20 +/-10
1500 +100
0.8 +/- 0.4
59 + 4
B_06781
F *
182 +/- 1
7.17 +/- 0.04
103
Advertisement
Table of Contents
