VERSION 02/2018
OPERATING MANUAL
4
Ensure the correct
insertion position!
6
Clean and degrease the inside of the
adapter and the cascade, then grease
the cascade surface with Vaseline.
SW19
2.5 Nm
B_05909
ORDER NUMBER DOC 2366717
Valve needle assembly tool,
Order No. 2309368
1. Move the valve rod to the rear position so that the sealing area
does not become scratched (1).
2. Very slightly tighten valve tip (2) using an assembly tool with
three fingers.
3. Use socket or ring spanner (no wrench) to tighten the valve
housing (3).
4. Slide the valve rod to the forward position (at the valve seat) (4).
2
2
2
3
SW11
1.8 Nm; 1.3 lbft
7
SW19
Ensure that the spring is inserted in the adapter.
Ensure that the flat gasket is inserted in the handle.
5
B_04980
0.1 Nm; 0.07 lbft
B_05910
1
4
SW3
0.8 Nm
90