Align Receiver - Pilz PSENvip RL D P Set Operating Manual

Commissioning
7.2.1.6

Align receiver

} Attach an adjustment template with magnets to the upper tool. The tip of the upper tool
must sit in the notch on the stop of the adjustment template.
Align the alignment grid of the adjustment template to the contour of the upper tool.
Fig.: Attach the adjustment template to the receiver
} Press the <MODE> key.
}
Using the keys
} Press the <ENTER> key to open the Adjustment option.
The adjustment image shown in the illustration below will appear on the receiver display.
Please note that the bending line is approximately 7 mm to the left of the centre of the dis-
play.
Fig.: Adjustment image
Operating Manual PSENvip RL D P Set
1001641-EN-09
, select the Adjustment option.
Align the
alignment grid
on the upper
tool
Centre point of
the upper tool
in the notch on
the back stop
| 69