Function Description; Overview - Pilz PSENvip RL D P Set Operating Manual

Function description

4 Function description
4.1

Overview

The PSENvip is a camera-based protection system for press brakes. It consists of a trans-
mitter and receiver, which are fixed to the moving part of the press brake, the upper die.
The detection zone between the transmitter and receiver monitors the immediate danger
zone below the moving upper tool.
The detection zone moves with the upper die, providing mobile safeguarding of the danger
zone. If an object encroaches into the detection zone, both output signal switching devices
(OSSD1, OSSD2) on the PSENvip will switch to the OFF-state. The safety system will use
these signals to initiate stopping of the press stroke.
Fig.: Press brake with PSENvip
} 1: Upper tool
}
2: Upper die
} 3: Receiver
}
4: Detection zone
}
5: Lower tool
}
6: Transmitter
The PSENvip is part of an overall system comprising
}
PSENvip transmitter and receiver
} Programmable safety system PSS 4000
}
CNC controller
}
Signals from incremental encoders for defining the position and speed
}
External operator elements or signals (foot switch, reset button for reduced protected field
or setup mode, E-STOP pushbutton)
}
Other safety devices (safety valves, prefill valve, contactor for E-STOP)
Operating Manual PSENvip RL D P Set
1001641-EN-09
1
3
2
4 5 6
| 18