Table of Contents
Advertisement
Installation
5
Installation
5.1
General requirements
Please note for installation:
}
The PSENvip may only be installed by qualified personnel.
}
The environmental data for the PSENvip must be taken into account. Details are avail-
able in the chapter entitled "Technical Details".
}
The transmitter and receiver should be installed with the respective front lenses aligned in
parallel to each other.
}
The distance between the transmitter and receiver may not be greater than the value
stated in the "Technical Details".
Operating Manual PSENvip RL D P Set
1001641-EN-09
CAUTION!
Ensure that the field of vision of the front lenses on the transmitter and re-
ceiver is not restricted. Do not attach any other optical elements such as
glass/plastic surfaces, films or lenses.
– Check the fastening of the PSENvip at regular intervals.
– Check that the fastening of the PSENvip is not accidentally working
its way loose as a result of vibration from the press brake.
| 50
Advertisement
Table of Contents
