Adjustment Directions Of Transmitter And Receiver - Pilz PSENvip RL D P Set Operating Manual

Commissioning
7.2.1.3

Adjustment directions of transmitter and receiver

The PSENvip transmitter and receiver can be adjusted in three directions.
Fig.: Adjustment directions of transmitter and receiver
Direction
A
B
C
Guidelines for the mechanical alignment of transmitter and receiver:
}
When making the alignment, the nuts on the bolt connecting the PSENvip to the adjust-
ment plate should only be hand-tightened.
}
There are three notches on the adjustment plate and auxiliary adjustment plate for rotat-
ing the transmitter and receiver. The transmitter or receiver is inserted into the slot holes
on the adjustment plate (adjustment direction B).
} Push the screwdriver blade into the middle notch of the auxiliary adjustment plate and ad-
justment plate.
}
Rotate the screwdriver blade in the required direction.
}
You can use the left or right-hand notch to rotate the transmitter or receiver even further
to the left or right.
Operating Manual PSENvip RL D P Set
1001641-EN-09
What?
Move horizontally within the groove of the adjustment plate
Rotate on a horizontal plane within the slot holes of the adjustment
plate
Move vertically by adjusting the nuts on the bolts
| 65