Correct Handling Of The Workpiece - Pilz PSENvip RL D P Set Operating Manual

Safety
3.1.2.4

Correct handling of the workpiece

Correct handling with flat workpieces
}
Grip the metal sheet by the front corners. Thumbs should be on top of the sheet, palms
should hold the sheet from below.
Fig.: Handling flat workpieces
Operating Manual PSENvip RL D P Set
1001641-EN-09
WARNING!
Crushing and trapping of fingers or hands!
With box bending and/or back gauge bending mode, the protected field is
partly blanked.
Around the bending line there is an increased risk of crushing and trapping
of fingers or hands.
| 12