Pilz PSENvip RL D P Set Operating Manual page 108

Attachment
No Action
.
5 Check commissioning
Has the system been commissioned correctly in ac-
cordance with the documentation?
6 Check the circuitry of the programmable safety
and control system
Have the outputs that have been defined as OSSDs
been incorporated in accordance with the required
category?
Are the switching elements that are connected to
the outputs (e.g. valves, contactors) monitored via
feedback loops?
Does the wiring of the inputs and outputs match the
circuit diagram?
7 Check the effectiveness of the PSENvip during
the hazardous movement
Is the PSENvip effective throughout the whole of
the hazardous movement of the plant/machine?
Is the safety function tested in accordance with the
instructions specified in this documentation?
8 Check protected field modes
Do the protected field modes operate in accordance
with the setting of the operating mode selector
switch?
Date: ................................................
Signature: ........................................................................
Operating Manual PSENvip RL D P Set
1001641-EN-09
OK Not Notes
OK
| 108