Table of Contents
Advertisement
Safety
3.3.1
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by persons who are competent to do so.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
}
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the specific
application.
Approved personnel must be familiar with how to use and test ESPE and be authorised by
the ESPE operator to do this.
3.3.2
EMCD
The PSENvip is designed for use in an industrial environment. It is not suitable for use in a
domestic environment, as this can lead to interference.
3.3.3
Warranty and liability
All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.3.4
Safety during commissioning, installation and operation
Please read the guidelines stated in the chapters entitled "Commissioning", "Installation"
and "Operation".
3.3.5
Disposal
}
In safety-related applications, please comply with the mission time T
characteristic data.
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
Operating Manual PSENvip RL D P Set
1001641-EN-09
in the safety-related
M
| 17
Advertisement
Table of Contents
