Pilz PSENvip RL D P Set Operating Manual page 89

Operation
}
Remove the dust from the front lens using a soft brush.
}
Spray the front lens using an alcohol glass cleaner. Do not allow drops to form on the
lens.
}
Use a soft cloth to wipe across the whole of the front lens.
}
Remove any heavier dirt without scratching the front lens.
}
Carry out a function test using the test piece. See Chapter 7, "Commissioning", section
entitled "Function test of the safety device".
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 89