System Cycle For Box Bending With Back Gauge Press Stroke - Pilz PSENvip RL D P Set Operating Manual

Function description
4.7.4

System cycle for box bending with back gauge press stroke

Inputs on the PSENvip receiver:
} Protected field mode 1 = 1
}
Protected field mode 2 = 1
}
Acknowledgement of reduced protected field = Press pushbutton and then release
The system cycle is the same as for box bending. Please note that with box bending with
back gauge protected field mode, both the front and rear segments of the protected field
are blanked.
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 49