Getting Started And System Setup; Hardware Requirements; Power; Maximizing The Power Supply - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use – EN

3 Getting started and system setup

3.1

Hardware requirements

System requirements USB EyeSeeCam systems
Laptop PC: One USB 2 port available
Desktop PC: One USB 2 port available
Furthermore, Microsoft .Net 2.0 Framework and Windows Installer 3.x should be available. If these
programs are not installed on your computer, you will be prompted to install them when running the
EyeSeeCam installation. Just click yes when the installer asks you, and they will be installed
automatically.
Finally, Adobe® Reader® must be installed from the included installation CD.
Operating System Requirements:
®
Windows 7 (32 & 64 bit).
®
Windows 8 (32 & 64 bit).
Windows® 10 (32 & 64 bit).
3.2

Power

3.2.1

Maximizing the power supply

Eye images in the vHIT user interface can become flickering and unstable if the power supplied to the
camera is not maximized.
These problems mainly occur in PC systems using chipset technology from INTEL.
To maximize the power supply, CPU power saving features must be disabled either in the bios setup or
via the software as described below. It is recommended to control the CPU power saving features in the
computer's BIOS rather than via software.

3.2.2 Entering BIOS

BIOS setup can be entered by following the instruction on the screen shortly after the system is switched
on.

3.2.3 Changing BIOS setting

CPU power saving features need to be changed to have maximum power / performance by disabling
Speed Step and other power controlling features.
See example below - changes into 'Disabled' must be applied to the functions inside the red boxes
Page 9