2.2
I/O Wiring
AMAX-5000 I/O modules leverage detachable clamp type terminal blocks. Compar-
ing with traditional screw type terminal blocks, clamp type terminal blocks can save
wiring time and provide better reliability for shock and vibration. Follow the proce-
dures below for wiring your AMAX-5000 I/O module.
1.
Use the screw driver to press the left notch on the terminal.
2.
Insert the wire into the terminal.
Note!
Please use # 14 AWG ~ 28 AWG wire for terminal block.
2.3
Dimensions
AMAX-5000 Series User Manual
10