Download
Share
Print this page
Advantech ADAM-6050W Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. I/O Systems
  5. ADAM-6050W
  6. Manual
Advantech ADAM-6050W Manual

Advantech ADAM-6050W Manual

18-channel digital i/o module
Hide thumbs

Advertisement

Quick Links

Download this manual
ADAM-6050W 18-channel Digital I/O Module
The ADAM-6050W is a high-density I/O module built-in a IEEE802.11b wireless LAN interface for seamless Ethernet
connectivity. It provides 12 digital input and 6 digital output channels with 5000V
Isolating protection. All of the
RMS
Digital Input channels support input latch function for important signal handling. Mean while, these DI channels allows
to be used as 1 KHz counter. Opposite to the intelligent DI functions, the Digital Output channels also support pulse
output function.
ADAM-6050W
Figure 1: ADAM-6050W 18-channel Digital I/O Module

Advertisement

loading
Need help?

Need help?

Do you have a question about the ADAM-6050W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech ADAM-6050W

Summary of Contents for Advantech ADAM-6050W

  • Page 1 ADAM-6050W 18-channel Digital I/O Module The ADAM-6050W is a high-density I/O module built-in a IEEE802.11b wireless LAN interface for seamless Ethernet connectivity. It provides 12 digital input and 6 digital output channels with 5000V Isolating protection. All of the Digital Input channels support input latch function for important signal handling. Mean while, these DI channels allows to be used as 1 KHz counter.
  • Page 2 ADAM-6050W Specification Analog Input • Channel: 18 • I/O type: 12 DI & 6 DO • Digital Input: Dry Contact: Logic level 0: Close to GND Logic level 1: Open Wet Contact: Logic level 0: +3 V max Logic level 1: +10 to 30 V •...
  • Page 3 Application Wiring Figure 2: ADAM-6050W Digital Input (Wet Contact) Wiring Figure 3: ADAM-6050W Digital Input (Dry Contact) Wiring...
  • Page 4 Figure 4: ADAM-6050W Digital Output Wiring...

  • Page 5: System Architecture

    System Architecture...
  • Page 6 Step 2 : Please go the “Network” page to change the IP address/Subnet Address/Default Gateway of ADAM-6050W module to be compatible with user’s existing network and set the host idle time out value (the ADAM-6000 module can only accept 8 connection from host station. Any host station doesn’t request the communication with this ADAM-6000 module over the time out setting, the connection of this host station will be released for the other stations).
  • Page 7 Step 3 : Re-configuring the IP address of the configuration PC to be the original setting (compatible with user’s existing network) then re-start the utility software. The software will automatically search the ADAM-6050W module again. Step 4 : Go to the “Wireless” page to set the wireless LAN configuration.
  • Page 8 Please assign the SSID for the specific wireless AP to be connected with ADAM-6000W modules. User can place “ANY” key to let the ADAM-6000W modules to automatically search the existing wireless AP. Or key in the specific SSID to assign the dedicated AP (strongly recommending to set up the dedicated SSID, it can guarantee the communication of ADAM-6000W modules to be stable) For assigning the dedicated wireless LAN AP, user can use the site survey function to check the existing AP in connection environment.
  • Page 9 Selecting the AP in the searching result table. Press “Apply” bottom to accept the AP to finish the set up action.
  • Page 10 Please select the region for your area. Setting the used channel, the channel number must be included in the channel segment of your region. Please select the basic rate for the communication bandwidth.
  • Page 11 Press the “Apply” bottom to finish the set up work. Step 5 : Configure the WEP security setting. Please go to the WEP page in “Wireless” of utility software. If user want to use the WEP security function, please enable the WEP function in “User WEP” then select the Key format and key in the WEP key for this requirement.
  • Page 12 Step 6 : Data Stream Configuration In addition to TCP/IP communication protocol, ADAM-6000 supports UDP communication protocol to regularly broadcast data to specific host PCs. Click the tab of Data Stream, then configure the broadcasting interval and the specific IP addresses which need to receive data from the specific ADAM-6000 I/O module.
  • Page 13 Data Stream Monitoring After finishing the configuration of Data Stream, you can select the item “Monitor Data Stream” in the function bar or click icon to call up operation display as below Figure. Select the IP address of the ADAM-6000 you want to read data, then click “Start ” button. The Utility software will begin to receive the stream data on this operation display.
  • Page 14 Firmware/Web Page Configuration Step 1 : Please go to the “Firmware/Web” configuration page Step 2 : The ADAM-6000W modules support the configurable web page feature. Users don’t have to learn the Java language to write the Java program to make the customized web page. Users can use the utility software to easily configure the web page that you want.
  • Page 15 Key in the Tag Name of input channel. Key in the description of input channel Press the label bottom to configure the label description of input channel.
  • Page 16 Key in the Tag Name of output channel Key in the description of output channel...
  • Page 17 Press the label bottom to configure the label description of output channel Click the title position to configure the page title description...
  • Page 18 Please press “OK” after finishing all of the web page configuration. Press “Update” bottom to download the web page configuration into ADAM-6000W module. And system will save the configuration data as a file in C:\Programs\ADAM-5000TCP-6000 Utility\Program\Firmware\ADAM-6050W\ADAM6050W.Html...
  • Page 19 User can also retrieve the previous web page configuration file to download to ADAM-6000W Module.
  • Page 20 Select the stored web page configuration file then press “Open” Follow the above action to download the selected file into ADAM-6000W module.
  • Page 21 Firmware Update Step 1 : Press the browse bottom of firmware Step 2 : Select the firmware file to be downloaded Step 3 : Press “Update” bottom to finish the firmware update action...
  • Page 22 Input/Output Channel Configuration Step 1 : Please click on the “6050W” to go to the ADAM-6050W configuration main page. Step 7 : Please go to “Communication WDT” to set up the communication watchdog timer setting. This function is used for security protect, it means sometimes, noise or other reasons will cause the communication fail, and the host PC won’t control the modules anymore, but the modules will keep the...
  • Page 23 Step 3 : Please click on “DO:XX” to access the digital output channel configuration page. The digital output channel of ADAM-6050W can be configured as typical DO output, pulse output, DO with LO to Hi delay or DO with Hi to LO delay:...
  • Page 24 For “Lo to Hi delay” and “Hi to Lo delay” function :...
  • Page 25 Step 4 : Please click on “DI:XX” to access the digital input configuration page. The digital input channel of ADAM-6068 supports typical DI, counter, frequency, Lo to Hi Latch and Hi to Lo Latch. For typical DI setting : For Counter setting :...
  • Page 26 For Frequency setting :...
  • Page 27 For “Lo to Hi Latch” and “Hi to Lo Latch” setting :...
  • Page 28 Appendix : Adam-6000W Mode Setting switch Mode 1 (Normal Mode): In this mode, you can use Utility to configure module to Infrastructure or Ad hoc mode. Mode 2 (Diagnostic Mode): The purpose of this mode is used to recover the Adam-6000W module from error state.
  • Page 29 Assigning addresses for the ADAM-6050W Modules ADDR 0X ITEM Attribute ADDR 4X ITEM Attribute 00001 40001~40002 *Counter *Counter 00002 40003~40004 *Counter 00003 40005~40006 *Counter 00004 40007~40008 *Counter 00005 40009~40010 *Counter 00006 40011~40012 *Counter 00007 40013~40014 *Counter 00008 40015~40016 *Counter 00009...
  • Page 30 Set Absolute Pulse 00042 Clear Counter(1) 40049~40050 (0=Continue Mode) Set Absolute Pulse 00043 Clear Overflow 40051~40052 (0=Continue Mode) Latch Status/ Clear Set Absolute Pulse 00044 40053~40054 Status (0=Continue Mode) Counter Set Absolute Pulse 00045 40055~40056 Start(1)/Stop(0) (0=Continue Mode) Set Absolute Pulse 00046 Clear Counter(1) 40057~40058...
  • Page 31 00071 Clear Overflow Latch Status/ Clear 00072 Status Counter 00073 Start(1)/Stop(0) 00074 Clear Counter(1) 00075 Clear Overflow Latch Status/ Clear 00076 Status Counter 00077 Start(1)/Stop(0) 00078 Clear Counter(1) 00079 Clear Overflow Latch Status/ Clear 00080 Status *Note : How to retrieve the counter/frequency value on Modbus address mapping Example : Counter(dec) = (value of 40002) x 65536 + (value of 40001) Frequency(dec) = (value of 40001)/10 Hz...
  • Page 32 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.