Advantech AMAX-5000 Series User Manual page 150

Step9: Set Position_Compare_Offset (0x7000:09) to "0" when buffer is written.
Step10: Read Set_Position_Compare_Offset_Done (0x6000:06) again, if the value is
"0", then the next offset value can be set to the buffer if needed.
Figure 6.33 Set Position Compare Offset Value
Please refer to the following flow chart to set the position compare output configura-
tion:
Figure 6.34 AMAX-5081 Hardware Position Compare Configuration – Flow
Chart
AMAX-5000 Series User Manual 138