I/O Wiring - Advantech APAX-5000 Series User Manual

1.2

I/O Wiring

APAX-5000 I/O modules leverage detachable clamp type terminal blocks. Comparing
with traditional screw type terminal blocks, clamp type terminal blocks can save up to
75% wiring time and provide better reliability for shock and vibration. Follow the pro-
cedures below for wiring your APAX-5000 I/O module.
1. Insert the screw driver into the left hole of the terminal.
2. Insert the wiring into the right hole of the terminal.
Note! Please use # 14 AWG ~ 28 AWG wire for terminal block.
APAX-5000 I/O Series User Manual 4