Information Modes - Javad Prego Operator's Manual

When data recording is on...
Not pressed
Press < 1 second
Press 1–5
seconds
Press 5–8
seconds
Press > 8
seconds

Information Modes

www.javad.com
Table 4-1. FN Key Functions and REC LED Status
FN Key REC LED
Red
If FN key mode is "LED blink mode switch"
Green
If FN key mode is Occupation mode switch
Green
Orange
If FN key mode is "LED blink mode switch"
Orange
If FN key mode is "Occupation mode switch"
Orange
No light
Red
No light
The Prego MinPad has two information modes: Normal and Extended
Information Mode (EIM).
Status
No free memory; hardware problem
with data recording.
Data recording started (post-
processing occupation mode
undefined).
Data recording started (Kinematic
post-processing occupation mode).
Data recording started (Static post-
processing occupation mode).
Release to change information
mode.
Release to toggle between Static and
Kinematic post-processing modes.
Release to stop data recording.
Release to turn serial port A baud
rate to 9600 bps.
No function (data recording still on).
Prego Operator's Manual 4-5
O P E R A T I O N
Using the MinPad