Javad Prego Operator's Manual page 86

S E T U P A N D M E A S U R I N G
3
Measuring with the Prego
Notice: The reference geodetic coordinates you specify on this tab will relate to
the antenna L1 phase center.
Notice: For Pacific Crest PDL (UHF) modems, use a 38400 baud rate. For
Spread Spectrum 915 MHz/2.4 GHz modems, use a 19200 baud rate.
3-16 Prego Operator's Manual
Figure 3-11. Base Tab Configuration
12.Select the Ports tab and set the following port parameters (Figure 3-
12 on page 3-17).
• Output drop-down list – select type and format of differential
corrections.
• Period (sec) – enter interval at which receiver will generate
differential corrections.
• Baud rate drop-down list – select a baud rate (i.e., the rate with
which differential messages will be transmitted from receiver to
modem).
www.javad.com