Javad Prego Operator's Manual page 56

C O N F I G U R A T I O N
2
Radio Configuration
Click the Radio Link tab and set the following parameters (Figure 2-26):
9.
• Manual – enable
• Channel TX RX – set channel and frequency as desired
• Link Rate – leave at 9600 (requires a modulation type of GMSK)
• Digisquelch – set on High for Rover; Low for Base station
• Forward Error Correction – disable
• Scrambling – enable
• Local Address – leave at 0
2-20 Prego Operator's Manual
Figure 2-26. PDL Radio LInk Tab
www.javad.com