Ms Activesync - File->Get Connected - Javad Prego Operator's Manual

C O N F I G U R A T I O N
2
Calibrating the Windows® CE Controller
4. Connect the Prego receiver's integrated controller (RNGR port) to a
5. Turn on your computer and run MS ActiveSync.
6. Click on File->Get Connected (Figure 2-37).
7. Tap Yes on your controller when "Connect to desktop?" appears to start
2-32 Prego Operator's Manual
computer using the Receiver-to-computer serial RS232 cable and a
connection adapter (if required).
Figure 2-37. MS ActiveSync – File->Get Connected
the connection.
Figure 2-38. Connect to Desktop?
The software will search for any device connected to the
communication port.
Figure 2-39. Connecting Controller and Computer
If the connection has trouble, click File->Connection Settings and
enable "Allow serial cable or infrared connection to this COM port,"
www.javad.com