Javad Prego Operator's Manual page 84

S E T U P A N D M E A S U R I N G
3
Measuring with the Prego
3-14 Prego Operator's Manual
4.Press the power key on the receiver.
5.Check the STAT light for tracked satellites.
6.Connect your receiver and computer. See "Connecting the Prego and
a Computer" on page 2-4 for this procedure.
7.Click Configuration->Receiver.
8.Restore the receiver's default settings. Click the Set all parameters
to defaults button located at the bottom of the Receiver Configuration
screen (Figure 3-9).
Figure 3-9. Set All Parameters to Defaults
9.On the Receiver Configuration screen, select the MinPad tab and
specify your desired settings. See the PCView User's Manual for more
information.
www.javad.com