Chapter 2: Configuration - Javad Prego Operator's Manual

C
This chapter describes:
• Prego power supply
• Connecting the receiver and a computer
• Prego configuration
• Radio configuration
• MinPad configuration
• Calibrating the touch screen
• Collecting almanacs
Before you can use your Prego, you need to:
1. Charge the batteries. See "Powering the Prego" on page 2-2.
1.
• "Connecting the Prego and a Computer" on page 2-4,
• "Prego Configuration" on page 2-6,
• "Radio Configuration" on page 2-15,
• "MinPad Configuration" on page 2-24, and
• "Calibrating the Windows® CE Controller" on page 2-30.
2.
www.javad.com
ONFIGURATION
Configure and calibrate (as needed) the various parts of your receiver. See:
Collect an almanac. See "Collecting Almanacs" on
page 2-33.
2
Prego Operator's Manual 2-1