Javad Prego Operator's Manual page 47

C O N F I G U R A T I O N
Prego Configuration
• Auto – receiver will select automatically the power source.
• Mix – receiver will detect automatically and start consuming power
from the source with the highest voltage.
• Battery A – receiver will consume power from battery A.
• Battery B – receiver will consume power from battery B.
• External – receiver will use an external power supply.
Figure 2-13. Select Power Mode
4. Select the Charger Mode drop-down list to set the desired charger mode
(Figure 2-14). Current Mode displays the charging battery.
Figure 2-14. Select Charger Mode
• Off – receiver will not charge batteries.
• Charge A – receiver will charge only battery A.
• Charge B – receiver will charge only battery B.
• Auto – receiver will automatically detect and charge batteries.
www.javad.com Prego Operator's Manual 2-11