Creating Scripts - Javad Prego Operator's Manual

A

Creating Scripts

You can use the following procedure to create script files. Script files allow you
to save manual commands into one file. You can then load this single script
instead of typing each individual command.
Notice: For more information on script files, see the PCView User's Manual.
1. Connect your receiver and computer.
1.
2.
3.
4.
5.
6.
www.javad.com
PPENDIX
Start PCView.
Click on File->Manual Mode.
Click Edit Script.
Navigate to the folder in which you want to save the script file.
Type a file name. All files have a .jpc extension.
For example, Daisy_38400.jpc to enable the daisy chain and Daisy_Off.jpc
to disable the daisy chain.
Click Yes to create the file.
A
Prego Operator's Manual A-1