Table of Contents
Advertisement
7.19.1.2 Cleaning the seat cushion
Standard seat cushion
► Clean the seat cushion according to the attached care label.
Seat cushion with foam core
1) Open the zipper and remove the foam core (see fig. 76).
2) Clean the cover according to the attached care label.
3) Wash all foam parts by hand at 40°C using a mild, environmentally friendly detergent. Allow to air dry.
4) Reinsert the foam core with proper alignment. Close the zipper.
76
Important information on cleaning
•
For more information on cleaning seat cushions, see the care instructions on the product or the supplied
instructions for use.
7.19.1.3 Cleaning belts/straps
Cleaning a belt system with metal closure
INFORMATION
Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.
Straps with metal closures may not be washed in the washing machine as the penetration of water could
•
cause corrosion and subsequent malfunctions.
•
Clean the belt straps by gently dabbing them with warm soapy water (with some disinfectant) or carefully wipe
with a dry, clean, absorbent cloth.
Cleaning a belt system with plastic closure
•
Depending on the model, belts/straps with plastic buckles can be washed in the washing machine between
40 °C and 60 °C.
•
Recommendation: Use a laundry bag or net and mild detergent.
INFORMATION
Alternatively, the belt straps can be cleaned by gently dabbing them with warm soapy water (with some disinfect
ant) or carefully wiped with a dry, clean, absorbent cloth.
Additional cleaning instructions
•
Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
•
Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).
•
Do not iron or bleach the belts.
7.19.2 Disinfection
1) Thoroughly clean the pads and handles before disinfecting.
2) Wipe all parts of the wheelchair with a disinfectant.
Important information about disinfecting
Avantgarde 4
Use
41
Advertisement
Table of Contents
