Lighting; Belts/Belt Systems - Otto Bock C1000 DS Instructions For Use Manual

Use
The depth position of the control panel is subsequently adjustable.
48

8.15.2 Lighting

Information on replacing broken lamps: see Page 71.
The installed lighting is suitable for driving in street traffic during hours of darkness.
The light, the right and left direction indicators and the warning flashers are operated via the control panel.
Front lighting
49
Rear lighting
50

8.15.3 Belts/belt systems

INFORMATION
Information on the lap belt: see Page 48.
The following instructions for adjustment and use apply to four-way chest straps and chest belts.
60
Adapting the control panel position to the forearm
length
1) Loosen the 3 set screws on the bottom of the arm­
rest.
2) Slide the rail with the control panel forwards or
backwards.
INFORMATION: If the control panel rail is too
long it can be shortened. Please contact the
qualified personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the arm­
rest.
The front lights are on the splash guard.
The front lighting consists of 2 LED front lights,
respectively with LED front light (see fig. 49, item 1)
and direction indicator (see fig. 49, item 2).
Rear lights
Two LED direction indicator lights (see fig. 50, item 1)
and two LED rear lights (see fig. 50, item 2) are
installed in the steering motor mouldings at the rear of
the power wheelchair.
Reflectors
In addition to the rear lights, a reflector is installed on
the right and left underneath the luggage carrier (see
fig. 50, item 3).
INFORMATION: Do not cover the reflectors with
luggage when loading the luggage carrier.
C1000 DS