Adjusting The Seat Width - Otto Bock BRAVO Racer Service Manual

4.3.8 Adjusting the seat width

Adjusting the seat width requires a conversion kit (consult the spare parts catalogue) and a new
seat cushion. The conversion kit includes a crossbrace and back unit in the new seat width, and
an installation kit. We recommend replacing the upholstery as well.
a) Removing the seat:
First remove the seat cushion, seat upholstery, and front tube end caps. Loosen the hook-and-
loop connections on the tension-adjustable upholstery in order to slacken it. Evenly pull the
seat upholstery and upholstery bars out of the guides towards the front (use pliers if required)
(Figure 47).
Now remove the push handles and back upholstery as described in Section 4.4./4.4.4 and
4.4.6.
If clothing protectors are installed, remove the screw connections underneath the lip of the cloth-
ing protector (Figure 48).
0
45
47
46
48