Table of Contents
Advertisement
12.8.2.1 Five Step Status Check
Device
Here the device network settings and basic data is request-
ed.
Input 1 can only be configured for establishing the connec-
tion. Is it configured accordingly, it is displayed here.
The state of the signal is shown with the prepended soft-
LED (grey = 0/low, green = 1/high).
Input 2 can be used to send emails, SMS, Internet SMS or
to start a reboot. Is it configured accordingly, it is displayed
here.
The state of the signal is shown with the prepended soft-
LED (grey = 0/low, green = 1/high).
If an email, SMS or Internet SMS has been configured, the
button "Test" appears. Clicking this button will carry out a
test on the setting.
Additional information can be obtained by clicking on the
"Logging" or the "Diagnostic" link. These data help us to
provide additional support when dealing with problems.
Connecting to the Internet
Here the connection is requested to the Internet and dis-
play the connection data.
Additional information can be obtained by clicking on the
"Logging" link. These data help us to provide additional
support when dealing with problems.
„PING:" here the test server entered is displayed.
The LED signals the connectivity (grey = not pinged yet,
green = available, red = not available).
MDH 860
MDH 861, MDH 862
MDH 863
all device types
MDH 860
MDH 861, MDH 862
MDH 863
all device types
Initial configuration | Page 75 of 131
Advertisement
Table of Contents
