Creating The Plc Connection - MB Connect Line mbNET MDH810 Manual
Hide thumbs
Also See for mbNET MDH810:
- Quick start up manual (26 pages) ,
- Manual (237 pages) ,
- Technical data manual (7 pages)
Table of Contents
Advertisement
20.1.1
Creating the PLC connection
The "Name" field must not contain any control characters or spaces. Click the „+" button after entering the
data.
If using the MPI/PROFIBUS interface, the IP of the router's LAN interface must be entered in the PLC IP ad-
dress field. Otherwise the IP address of the PLC. The slot address is the bus address with MPI/PROFIBUS
communication and, in the case of direct Ethernet communication, the slot space of the PLC on the rack (gener-
ally two).
Page 190 of 226
Version: 3.3.5 – DR05 – 23.03.2017
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
