Table of Contents
Advertisement
12.3.4.1 LAN Settings
Enter a free LAN IP address and the Netmask from your system or machine network.
Notice, that the LAN and WAN IP-address should use a different address range.
IP
Netmask
1:1NAT Network
virtual Network
(1:1NAT)
SEARCHoverIP
LAN Settings
Enter the IP-address of your Device
Enter the Subnet mask where your Device should be integrated.
Activate „1:1NAT Network", if both contacts use the same Net address and want to
communicate with each other.
Enter your address of your network (e.g. 192.168.100.0/24). Make sure you use the
CIDR spelling for the IP-address!
Checkbox for activating / deactivating the function SEARCHoverIP.
NO T I CE
Initial configuration | Page 39 of 131
Advertisement
Table of Contents
