[Alarm2 No. (Obj. 2A00H: 03H)]; [Alarm Time (Second) (Obj. 2A00H: 04H)]; [Alarm Time (Nanosecond) (Obj. 2A00H: 05H)] - Mitsubishi Electric MR-J5-G-N1 User Manual

[Alarm2 No. (Obj. 2A00h: 03h)]

Data Type Access
U16 RO
Supported firmware version

ECT
A5 
Description
The value "0000h" is returned.
Bit 0 to Bit 7: Alarm detail number
Bit 8 to Bit 15: Alarm number

[Alarm time (second) (Obj. 2A00h: 04h)]

Data Type Access
U32 RO
Supported firmware version

ECT

A5
Description
The alarm time is returned as a 32-bit integer (time passed from January 1, 1970, 0:00:00.000000000).
If time data cannot be obtained from the network, alarm occurrence time shows the cumulative power-on time from January 1,
1970, 0:00:00.000000000.
Use this object together with [Alarm time (nanosecond) (Obj. 2A00h: 05h)] according to the system.

[Alarm time (nanosecond) (Obj. 2A00h: 05h)]

Data Type Access
U32 RO
Supported firmware version

ECT
A5 
Description
The digits after the ones indicating a second in alarm time are returned as a 32-bit integer. A value is returned in units of
nanoseconds, but only the values in milliseconds increase.
For example, if an alarm occurs on January 1, 2000, 12:00:00.001, "000F4240h (1000000)" will be returned.
Mapping Default
Impossible 0000h
 
 
Mapping Default
Impossible 00000000h
 
 
Mapping Default
Impossible 00000000h
 
 
Range Units
0000h to FFFFh 
 
 
Range Units
00000000h to second
FFFFFFFFh
 
 
Range Units
00000000h to nanosecond
FFFFFFFFh
 
 
7.1 [Alarm history newest (Obj. 2A00h)]
Save Parameter
Possible Alarm history
 
 
Save Parameter
Possible Alarm history
 
 
Save Parameter
Possible Alarm history
 
 
7 Alarm Objects
7
73